| Del Nej | Fabrikant | Anvendelse |
|---|
| MX581KESA | MaximIC | High precision 10 volt reference. Error +-10mV. |
| MAX6335US18D3-T | MaximIC | Ultra-low-voltage, low power microprocessor circuit with manual reset (reset output active-high, push/pull . Reset threshold(typ) 1.8V, reset timeout(min) 100ms. Standard version |
| MAX3244ECWI | MaximIC | +-15kV ESD-protected, 1microA, 1Mbps, 3.0V to 5.5V, RS-232 transceiver with autoshutdown plus. |
| MAX9042AEUA | MaximIC | Micropower, single-supply operation +2.5V to 5.5V, dual comparator + precision reference IC. |
| MAX170CMJA | MaximIC | Serial output 5.6 microsec 12-bit A/D converter. Error +-1/2 LSB. |
| MAX969EEE | MaximIC | Quad, micropower, ultra-low-voltage, Rail-to-Rail I/O comparator. Internal reference. Programmable hysteresis. |
| MAX6316LUK34CY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.400V, min reset timeout 140ms, typ watchdog timeout 1.6sec |
| MX7530KD | MaximIC | CMOS 10 bit multiplying D/A converter. Error 0.1% |
| DG303AC/D | MaximIC | Quad, TTL compatible CMOS analog switch. |
| MAX6320PUK36AW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.600V, reset timeout(min) 1ms, watchdog timeout(typ) 6.3ms |
| MAX6348UR46-T | MaximIC | Microprocessor supervisory circuit (reset output active-low, open-drain). Reset threshold (typ) 4.630V. Standard version. Order increment 2.5k |
| MAX239ENG | MaximIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MXD1005PA250 | MaximIC | 5-tap silicon delay line |
| MAX6317HUK41DY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.100V, min reset timeout 1.12sec, typ watchdog timeout 1.6sec |
| MX7545ABQ | MaximIC | TTL/CMOS compatible for Vdd = 5V or CMOS compatible for Vdd = 15V, 12-bit buffered multiplying DAC. Gain error +-3 LSB. |
| MAX4618CSE | MaximIC | Low-woltage, high-speed, CMOS analog IC configured as two 4-channel multiplexer |
| ICM7225CQ | MaximIC | 4-1/2 digit counter |
| MAX6316LUK41DW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.100V, min reset timeout 1120ms, typ watchdog timeout 6.3ms |
| ICM7218AIJI | MaximIC | 8 digit LED display driver |
| MAX6316LUK34CZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.400V, min reset timeout 140ms, typ watchdog timeout 25.6sec |
| MAX4567CEE | MaximIC | Dual SPDT switches, low-voltage, bidirectional RF/video switch. |
| MAX6313UK26D4-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 2.564(min) 2.696(max).Nominal timeout period 1120ms. |
| MAX4516ESA | MaximIC | +-1V to +-6V dual-supply opration, low-on-resistance, SPST, CMOS analog switch. Normally open (NO). |
| MAX6320PUK28AW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 2.800V, reset timeout(min) 1ms, watchdog timeout(typ) 6.3ms |
| MAX187CEPA | MaximIC | +5V, low-power, 12-bit serial ADC. Error(LSB) +-2. |
| MAX4074AGESA | MaximIC | Micropower, Rail-to-Rail, fixed-gain, single, GainAmp op amp. Inverting gain 2V/V, noninverting gain 3V/V, -3dB BW 135kHZ. |
| MAX6310UK40D1-T | MaximIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 3.900(min),4.100(max). Nominal timeout period 1ms. |
| MAX4145ESD | MaximIC | High-speed, low-distortion, differential line receiver. External gain selection +1V/V to 10V/V, 180MHz bahdwidth. |
| MAX4268EEE | MaximIC | Dual, ultra-low-distortion, single-supply, 300MHz op apm with enable. Min gain 1V/V, single-supply operation +4.5V to +8.0V |
| MAX6326XR29-T | MaximIC | Ultra-low-power microprocessor supervisory circuit (reset output active-low, push-pull). Reset threshold (typ) 2.930V. Standard version. Order increment 2.5k |
